On the Dominant Harmonic Source Identification—Part II: Application and Interpretation of Methods

This two-part paper presents the review, application, and interpretation of the methods for analyzing the harmonic distortions at the point of common coupling thoroughly. In Part I, two different definitions for the dominant side are discussed regarding the equivalent harmonic “voltage” or “current” source. In addition, common methods are categorized in three general concepts based on the direction of active power flow, the reactive power, and the voltage-current ratio. These three categories as well as their validity are analytically reviewed for both the definitions. In Part II, the application of the methods is illustrated using two common calculation examples. The magnitude and the phase angle of the equivalent harmonic sources are separately varied in the first and second calculation example, respectively. The validity of the methods is investigated using these calculation examples. Afterward, the physical interpretation of the methods is addressed. The difference between the dominant sides regarding the equivalent harmonic “voltage” and “current” source is discussed using the calculation examples. It is shown that if one of the utility and customer equivalent harmonic voltage sources is “much” larger than the other, the dominant sides regarding the equivalent harmonic “voltage” and “current” source will be the same. Some practical aspects such as the tolerance of the methods to errors in input data are discussed. In this regard, nonresonance and resonance conditions are taken into account. This two-part paper provides a comprehensive but clear review of methods for identifying the dominant side.