Sequential Estimator: Toward Efficient InSAR Time Series Analysis

Wide-swath synthetic aperture radar (SAR) missions with short revisit times, such as Sentinel-1 and the planned NISAR and Tandem-L, provide an unprecedented wealth of interferometric SAR (InSAR) time series. However, the processing of the emerging Big Data is challenging for state-of-the-art InSAR analysis techniques. This contribution introduces a novel approach, named Sequential Estimator, for efficient estimation of the interferometric phase from long InSAR time series. The algorithm uses recursive estimation and analysis of the data covariance matrix via division of the data into small batches, followed by the compression of the data batches. From each compressed data batch artificial interferograms are formed, resulting in a strong data reduction. Such interferograms are used to link the “older” data batches with the most recent acquisitions and thus to reconstruct the phase time series. This scheme avoids the necessity of reprocessing the entire data stack at the face of each new acquisition. The proposed estimator introduces negligible degradation compared to the Cramer-Rao lower bound under realistic coherence scenarios. The estimator may therefore be adapted for high-precision near-real-time processing of InSAR and accommodate the conversion of InSAR from an offline to a monitoring geodetic tool. The performance of the Sequential Estimator is compared to state-of-the-art techniques via simulations and application to Sentinel-1 data.