Experimental Validation of a Wideband Metasurface for Wide-Angle Scanning Leaky-Wave Antennas

Beam scanning arrays typically suffer from scan loss; an increasing degradation in gain as the beam is scanned from broadside toward the horizon in any given scan plane. Here, a metasurface is presented that reduces the effects of scan loss for a leaky-wave antenna (LWA). The metasurface is simple, being composed of an ultrathin sheet of subwavelength split-ring resonators. The leaky-wave structure is balanced, scanning from the forward region, through broadside, and into the backward region, and designed to scan in the magnetic plane. The metasurface is effectively invisible at broadside, where balanced LWAs are most sensitive to external loading. It is shown that the introduction of the metasurface results in increased directivity, and hence, gain, as the beam is scanned off broadside, having an increasing effect as the beam is scanned to the horizon. Simulations show that the metasurface improves the effective aperture distribution at higher scan angles, resulting in a more directive main beam, while having a negligible impact on cross-polarization gain. Experimental validation results show that the scan range of the antenna is increased from -39° ≤ θ ≤ +32° to -64° ≤ θ ≤ +70°, when loaded with the metasurface, demonstrating a flattened gain profile over a 135° range centered about broadside. Moreover, this scan range occurs over a frequency band spanning from 9 to 15.5 GHz, demonstrating a relative bandwidth of 53% for the metasurface.