Reduced DC-Link Voltage Active Power Filter Using Modified PUC5 Converter

In this letter, the five-level packed U-cell (PUC5) inverter is reconfigured with two identical dc links operating as an active power filter (APF). Generally, the peak voltage of an APF should be greater than the ac voltage at the point-of-common coupling (PCC) to ensure the boost operation of the converter in order to inject harmonic current into the system effectively; therefore, full compensation can be obtained. The proposed modified PUC5 (MPUC5) converter has two equally regulated separated dc links, which can operate at no load condition useful for APF application. Those divided dc terminals amplitudes are added at the input of the MPUC5 converter to generate a boosted voltage that is higher than the PCC voltage. Consequently, the reduced dc-links voltages are achieved since they do not individually need to be higher than the PCC voltage due to the mentioned fact that their summation has to be higher than PCC voltage. The voltage balancing unit is integrated into the modulation technique to be decoupled from the APF controller. The proposed APF is practically tested to validate its good dynamic performance in harmonic elimination, ac-side power factor correction, reactive power compensation, and power quality improvement.