The preparation and the properties of microcrystalline and nanocrystalline CuCr contact materials

The microcrystalline and nanocrystalline CuCr alloys prepared by high-energy ball milling and hot pressing were investigated in this paper. The experimental results show that the nanocrystalline Cu-Cr alloy powders are obtained by high energy ball milling, and the milled powders appear flaked or equiaxed morphology with or without liquid medium addition. The grain size of near fully dense alloys consolidated at 850 and 1200 K from milled powders is less than 100 nm and about 2-3 /spl mu/m, respectively. The ability to withstand high voltage of the nanocrystalline CuCr materials in vacuum is much higher than that of microcrystalline materials. The breakdown first takes place on the Cu-rich phase in the microcrystalline CuCr materials. For nanocrystalline CuCr materials, the breakdown exhibits a diffusional feature, in which the arc can move to the whole contact surface in a breakdown.