Passive Coding Technique Applied to Synthetic Aperture Interferometric Radiometer

For real-time and high-resolution radiometric imaging, the synthetic aperture interferometric radiometer (SAIR) technique seems to solve the tradeoff between imaging resolution and aperture size. Indeed, it can synthesize a large antenna array by sparsely arranging a small number of antennas to achieve high spatial resolution. Nevertheless, a conventional interferometric radiometer requires as many receivers as antennas needed. This constraint is one of the limitations of SAIR regarding the hardware cost, the system complexity, and the computation load. In this letter, a compressed acquisition technique is proposed to collect the antenna signals. In this method, the antenna's signals are coded and combined red with a passive microwave device. From the measured waveforms at the receiver's outputs, a decoding process is performed to estimate the received signal by each antenna. This allows the computation of the visibility function required for image reconstruction. The effectiveness of the proposed method has been tested by means of simulations analysis and has experimentally been applied to a punctual noise source detection. The results reveal that this method can be an efficient alternative for the simplification of the conventional interferometric radiometers' architectures.