Impact of Power-Electronic Sources on Transmission Line Ground Fault Protection

Power-electronic sources, such as Type 3 wind turbine generators and static synchronous compensators (STATCOM), interface to the grid through, partial- or full-scale, and power converters that have inherently fast switching capability to control their output current during short circuits. The short-circuit current is a function of the specific converter control algorithm and differs significantly from the conventional rotating machine sources without converter interfaces. Therefore, if a transmission-line protection scheme is designed for conventional sources, (not taking into account these differences in short-circuit current characteristics), reliability can be at risk. Using real-life short-circuit currents on lines supplied by sources having a power converter interface, this paper illustrates the reliability risk to conventional line protection schemes, in particular, to those which use negative-sequence quantities for the detection of unbalanced faults. This paper discusses the protection schemes, adopted by BC Hydro-a large Canadian Electric Utility, for transmission lines interconnecting Type 3 wind turbine and STATCOM sources. Their application for ground faults is independent of the converter control algorithm as long as the source is interconnected to the grid via a transformer which is a source of zero-sequence current.