A 2.4-GHz CMOS receiver for IEEE 802.11 wireless LANs

This paper describes a radio-frequency receiver targeting spread-spectrum wireless local-area-network applications in the 2.4-GHz band. Based on a direct-conversion architecture, the receiver employs partial channel selection filtering, dc offset removal, and baseband amplification. Fabricated in a 0.6-/spl mu/m CMOS technology, the receiver achieves a noise figure of 8.3 dB, IP/sub 3/ of -9 dBm, IP/sub 2/ of +22 dBm, and voltage gain of 34 dB while dissipating 80 mW from a 3-V supply.