The mechanical design for the second axis beam transport line for the DARHT Facility

This paper describes the mechanical design of the downstream beam transport line for the second axis of the Dual Axis Radiographic Hydrodynamic Test (DARHT II) Facility. The DARHT II project is a collaboration between LANL, LBNL and LLNL. DARHT II is a 20-MeV, 2000-Amperes, 2-/spl mu/sec linear induction accelerator designed to generate short bursts of X-rays for the purpose of radiographing dense objects. The downstream beam transport line is an 18-meter long region extending from the end of the accelerator to the bremsstrahlung target. Within this proposed transport line there are 17 conventional solenoid, quadrupole and dipole magnets; as well as several specialty magnets, which transport and focus the beam to the target and beam dumps. There is a high power beam dump, which is designed to absorb 80-kJ per pulse during accelerator start-up and operation. The beamline vacuum chamber has an 8-cm diameter aperture and operates at an average pressure of 10/sup -7/ Torr.