Application of Adaptive Digital Beamforming to Osaka University Phased Array Weather Radar

The X-band phased array weather radar (PAWR) at Osaka University has a rapid scanning rate and is capable of high-density observations in elevation; it produces approximately 100 plan position indicator radar images with a 60-km range, at different elevation angles, in less than 30 s. The PAWR uses a fan-shaped beam with a narrow beamwidth (1.2°) in azimuth and a wider beamwidth (from 5° to 10°) in elevation. With digital beamforming (DBF), the elevation beamwidth can be reduced to 1.2°, using 128 antenna elements arranged in tandem. Although the fan-shaped beam is useful for rapid scanning, the received signals tend to be affected by ground clutter. In this paper, we investigate the clutter suppression capability of common DBF methods: Fourier, Capon, and minimum mean-square error (MMSE) beamforming. Furthermore, to improve performance when the PAWR data contain errors-such as lacking data caused by mechanical problems-a correction method is proposed. The effect of clutter suppression using MMSE is shown to be greatly improved if used together with the proposed correction method. The resulting method is shown to sufficiently suppress clutter in all elevation angles above a few degrees, even in the presence of strong clutter; its clutter reduction performance is compared and found to be superior to the ones of the analyzed conventional DBF methods.