A 7.8-mW 5-b 5-GS/s Dual-Edges-Triggered Time-Based Flash ADC

This paper proposes a 5-b 5-GS/s time-based flash ADC in 65-nm digital CMOS technology, which utilizes both rising and falling edges of the clock for sampling and quantization. A dual-edge-triggered scheme reduces the dynamic power consumption of a voltage-to-time converter and the clock buffers by half. We doubled both the reset and the available regeneration times by interleaving the time comparators. The ADC has a low input capacitance and the calibration circuit is included on-chip for suppressing various mismatches. The prototype running at 5 GS/s consumes 7.8 mW from a 1-V supply and achieves a signal-to-noise and distortion ratio of 26.19 dB at Nyquist. The resulting figure of merit is 94.6 fJ/conversion-step and the core area is only 0.004 mm
²
.