Dielectric surface flashover in vacuum at 100 K

Cryogenic components in high power electrical systems and in power electronics gain more and more importance. The behavior of insulators for cryogenic conditions, however, is virtually unknown. In a fast coaxial setup, dielectric test sample and electrodes in vacuum are cooled to <100 K and flashover is characterized using fast electrical and optical diagnostics. Three consecutive development stages for flashover in self-breakdown mode with a gap distance of 0.5 cm can be distinguished: (1) a fast current rise to mA amplitudes within /spl sim/2 ns, probably associated with field emission, followed by, (2) a slow current rise to /spl sim/5 to 10 A amplitude with duration of 40 ns to 1 /spl mu/s, associated with secondary emission avalanche saturation, and (3) a transition to a rapid gaseous ionization above the sample caused by electron induced outgassing, leading to impedance-limited current amplitudes of /spl les/300 A. Phase (1) shows a higher final current at lower temperature, which is probably due to a higher initial velocity of the secondary electrons, the duration of phase (2) is a decreasing function of breakdown voltage and only slightly dependent on temperature, which points to a weak temperature dependence of the outgassing process. Flashover potentials show a slight increase at lower temperature.