Maximum Torque Per Ampere Control in Stator Flux Linkage Synchronous Frame for DTC-Based PMSM Drives Without Using q-Axis Inductance

When direct torque control (DTC) is applied to permanent-magnet synchronous motor (PMSM) drives, the relationship between the torque and stator flux linkage is important for high-efficiency drives because DTC requires them as references. In the stator flux linkage synchronous frame (M-T frame), the torque is described by a simple equation using the T-axis current. However, the M-axis current is neglected in the equation. This paper derives the relationship between the M-axis current and the stator flux linkage, and proposes a maximum torque per ampere (MTPA) control strategy for direct torque controlled PMSM drives using the above relationship. The proposed method does not require the q-axis inductance, which often varies due to the magnetic saturation. The simulation and experimental results verify that the MTPA condition can be obtained with the proposed method.