On Angular Features of Radar Bistatic Scattering From Rough Surface

In this paper, an attempt is made to investigate the angular signatures of bistatic scattering, in the azimuthal direction, from rough surfaces, with the aim of deepening our understanding of the bistatic scattering behaviors and exploring its potential applications. Three distinct angular features, dip angle, scattering strength, and angular width, as a function of the surface roughness and dielectric constant, are identified. Brewster's scattering, and its role in angular behavior, is examined at limited extent. Results reveal that the angular features strongly correlate with the surface parameters and scattering geometry. For small scattering angle, dip angle and width are independent of surface roughness. Comparatively, for larger incident and scattering angles, beyond 50°, the dip angle and scattering strength are sensitive, simultaneously, to rms height and dielectric constant, while the dip width only responses to rms height. Dips, induced by Brewster's scattering effect, not only shift in the polar direction, but also in the azimuthal direction, and are strongly dependent on surface parameters and bistatic geometry. Increasing the surface roughness or, equivalently, the incident angle tends to promote the disappearance of dips. The main contributions of this paper can be summarized as follows: 1) quantitative description of dip features, including angle, scattering strength, and angular width; 2) comprehensive characterization of the dip features and their dependence on surface parameters and bistatic geometries; and 3) limited investigation of the behavior of Brewster's scattering-induced dip.