Derivation of Sea Surface Tidal Current From Spaceborne SAR Constellation Data

In this paper, we demonstrate an application of spaceborne synthetic aperture radar (SAR) constellation data to derive sea surface tidal current at high spatial resolution. The maximum cross correlation (MCC) method, which has been widely applied to optical remote sensing data to derive sea surface velocities, is applied to X-band SAR data from TerraSAR-X (TSX) and TanDEM-X (TDX), which were operating in pursuit monostatic mode. Because of the short temporal interval of TSX and TDX's pursuit acquisitions, temporal de-correlation is minimized to derive tidal current fields that exhibit significant temporal and spatial variations. In addition, we combined data from TDX and another X-band SAR, COSMO-SkyMed, to obtain a virtual SAR constellation data pair, which was also analyzed using the MCC method to derive the tidal current field. Case studies of Hangzhou Bay in the East China Sea and Amrum Island in the North Sea are presented. The SAR-derived tidal current fields were compared to the results of numerical model simulations, high-frequency (HF) radar measurements and in situ measurements. MCC coefficients that are greater than 0.8 are an appropriate threshold for the further derivation of tidal currents. Comparisons to finite volume community ocean model, HF radar and general estuarine transport model results yield root-mean-square errors of 0.13, 0.06, and 0.05 m/s, respectively. Measurements from three field stations were also compared to the MCC SAR retrievals, yielding differences of 0.3, 0.07, and -0.09 m/s.