Error Detection Technique for a Median Filter

In digital image processing systems, the acquisition stage may capture impulsive noise along with the image. This physical phenomenon is commonly referred to as “salt-and-pepper” noise. The median filter is a nonlinear image processing operation used to remove this impulsive noise from images. This digital filter can be implemented in hardware to speed up the algorithm. However, an SRAM-based field-programmable gate array implementation of this filter is then susceptible to configuration memory bit flips induced by single event upsets, so a protection technique is needed for critical applications in which the proper filter operation must be ensured. In this paper, a fault-tolerant implementation of the median filter is presented and studied in-depth. Our protection technique checks if the median output is within a dynamic range created with the remaining nonmedian outputs. An output error signal is activated if a corrupted image pixel is detected, then a partial or complete reconfiguration can be performed to remove the configuration memory error. Experimental results show that our technique detects enough corrupted pixels in an image to prevent 91% of the corrupted images from being erroneously sent to the next image processing operation. This high error detection rate is achieved introducing only a 35% of additional resource overhead.