Impact of Magnet Geometry on Output of a Dynamo-Type HTS Flux Pump

A superconducting flux pump based on a high-temperature superconducting (HTS) dynamo has been demonstrated which employs rotating permanent magnets and a ReBCO conductor stator wire. This device is capable of injecting large dc currents (>100 A) into industrial superconducting magnet coils. Dynamic resistance, due to the interaction of the dc current with the ac magnetic field at the stator, provides a performance limit for this type of HTS dynamo exciter. It has been shown for a given device, the output of the HTS dynamo can be described by a simple circuit model linking short-circuit current (I
_sc
), dynamic resistance (R
_d
), and open-circuit voltage (V
_oc
). I
_sc
represents the maximum dc current that can be delivered by the dynamo to a series-connected superconducting circuit and is found to be independent of rotational frequency for a fixed device geometry. We have recently demonstrated that this dynamo effect can be applied to excite a closed superconducting circuit through the cryostat wall, such that all active components of the dynamo are located outside of the cryogenic envelope. Here, we report experimental results which explore the relationship between rotor magnet geometry and ReBCO stator wire width on the output performance of a simple HTS dynamo. We characterize the effect of magnet orientation, aspect ratio and shape, at fixed flux gap, on I
_sc
, R
_d
, and V
_oc
.