Reduced Active Switch Front-End Multipulse Rectifier With Medium-Frequency Transformer Isolation

This paper presents a reduced switch count multipulse rectifier with medium-frequency (MF) transformer isolation. The proposed topology consists of a three-phase push-pull based ac to dc rectifier with a MF ac link employing two active switches. A three-phase, five-limb, multiwinding MF transformer is employed for isolation. The secondary side of the transformer is connected in a zig-zag configuration and is fed to two six-pulse diode rectifiers, achieving 12-pulse rectifier operation. The primary advantage of the proposed system is reduction in size/weight/volume compared to the conventional 60 Hz magnetic transformer isolation rectifier system. Operating the transformer at 600 Hz is shown to result in three times reduction in size. Furthermore, the proposed system employs only two active semiconductor switching devices operating under a simple pulse width modulation scheme. Also, the zig-zag transformer connection helps to balance leakage inductance on the secondary side. Detailed analysis, simulation, and experimental results on a 208Vl-l, 3.15 kW laboratory prototype are presented to validate the performance of the proposed approach.