SAR tomography as an add-on to PSI: Gain in deformation sampling vis-a-vis quality of the detected scatterers

SAR tomography can be used as an add-on to persistent scatterer interferometry (PSI) to increase deformation sampling in urban areas by resolving the frequently occurring layovers that are by definition rejected in the PSI processing. This paper, while focusing on the case of a typical high-rise building in layover, quantitatively assesses the potential gain in deformation sampling achieved by the added use of an advanced SAR tomographic technique relative to a PSI approach. At the same time, the quantity of the detected scatterers is weighed against their quality, as assessed on the basis of root-mean-square (RMS) phase deviation between the measurements and the model fit. The quality of the scatterers is also compared with the quality of the persistent scatterers as identified with a PSI approach. The experiments are performed on an interferometric stack of 50 TerraSAR-X stripmap mode images.