Surface-Current Measurements as Data for Electromagnetic Imaging Within Metallic Enclosures

A 3-D microwave imaging method within metallic enclosures is investigated and improved. This method uses the components of the surface-current vector at receiver points on the enclosure wall as data. At the metallic wall, the normal component of the magnetic field as well as the tangential components of the electric field is negligible, whereas the vectorial surface current, which is directly related to the tangential components of the magnetic field, is dominant. After presenting the results of a numerical investigation based on synthetic data, the method is validated using an experimental system comprised of 24 co-resident shielded, coaxial half-loop antennas, distributed in four layers, within a cylindrical metallic enclosure. These antennas are used in receiver-transmitter pairs to introduce an electromagnetic field into the chamber and collect the magnetic field at the receiver points. The measured data are used as input to a multiplicatively regularized finite-element contrast source inversion algorithm. Due to their relatively small size and minimal protrusion into the chamber, these antennas minimally perturb the field distribution inside the chamber and thereby allow the use of a simple numerical inversion model, which does not need to account for the passive antennas. These attributes are especially useful for large computationally intensive industrial applications. The experimental system described herein is a laboratory-scale prototype for a stored-grain imaging application where metallic silos are utilized.