Low-Power ${G}_{{m}}{-}C$ Filter Employing Current-Reuse Differential Difference Amplifiers

This paper deals with the design of low-power high-performance continuous-time filters. The proposed operational transconductance amplifier architecture employs current-reuse differential difference amplifiers in order to produce more power-efficient G
_m
-C filter solutions. To demonstrate this, a sixth-order low-pass Butterworth filter was designed in a 0.18-μm CMOS, achieving a 65-MHz -3-dB frequency, an in-band input-referred third-order intercept point of 12 dBm, and an input-referred noise density of 40 nV/Hz
^1/2
, while only consuming 8.07 mW from a 1.8-V supply and occupying a total chip area of 0.21 mm
²
with a power consumption of only 1.19 mW per pole.