Fully depleted CMOS/SOI device design guidelines for low-power applications

We report the fully depleted (FD) CMOS/SOI device design guidelines for low-power applications. Optimal technology, device and circuit parameters are derived and compared with bulk CMOS based design. The differences and similarities are summarized. Device design guidelines using devices with L=0.1 /spl mu/m for FDSOI low-power applications are presented using an empirical drain saturation current model fitted to experimental data. The model is verified in the deep-submicron regime by two-dimensional (2-D) simulation. For L=0.1 /spl mu/m FDSOI low-power technology, optimum speed and lower-power occurs at V/sub dd/=3V/sub th/ and V/sub dd/=1.5 V/sub th/, respectively. Optimum buried oxide thickness is found to be between 300 and 400 nm for low-power applications. Optimum transistor sizing is when the driver device capacitance is 0.3 times the total load capacitance. Similarly optimum gate oxide thickness is when the driver device gate capacitance is 0.2-0.6 times the total load capacitance for performance and 0.1-0.2 for low-power, respectively. Finally optimum stage ratio for driving large loads is around 2-4 for both high-performance and low-power.