A 3.6 GHz Low-Noise Fractional-N Digital PLL Using SAR-ADC-Based TDC

This paper presents a fractional-N digital phase-locked loop (PLL) that achieves low in-band phase noise. Phase detection is carried out by a proposed 10-bit, 0.8 ps resolution time-to-digital converter (TDC) using a charge pump and a successive-approximation-register analog-to-digital converter (SAR-ADC) with low power and small area. The latency of the TDC is addressed by the designed building blocks. The fractional spurs are reduced by dual-loop least-mean-square (LMS) calibration. A ΔΣ-less and MOS varactor-less LC digitally-controlled oscillator (DCO) is proposed whose frequency resolution is enhanced to 7 kHz (or a unit variable capacitance of 2.6 aF) using a bridging capacitor technique. A prototype chip is fabricated using a 65 nm CMOS process, occupying an active area of 0.38 mm
²
and consuming a power of 9.7 mW at a reference frequency of 50 MHz. The measured in-band phase noise is 107.8 dBc/Hz to 110.0 dBc/Hz with a loop bandwidth of 1 to 5 MHz.