Gate-assisted reverse and forward recovery of high-power GTOs in series resonant DC-link inverters

The series resonant DC-link inverter is an attractive circuit topology for interfacing a DC current with a three-phase AC system. It uses gate turn-off thyristors (GTOs) as semiconductor switches. The conventional solution requires an additional series diode to perform the turn off process and to enable forward recovery of the GTO. This paper uses a single GTO along with a special gate drive to provide reverse and forward recovery. A new device testing circuit was designed to create the same electrical and thermal stresses as in a series resonant DC-link inverter. Experimental results using 2000 A GTOs at 26 kHz switching frequency demonstrate that the total device losses are reduced, while the hold-off time is slightly increased. The new single-device solution makes resonant switching attractive for very high-power applications.