Preparation of Er2O3 and TiO2 Multilayer Films as Optical Filter Using Magnetron Sputtering Deposition

Dispersion relations of refractive indexes and extinction coefficients of constituent materials were obtained by comparing the experimental and simulated transmission spectra of single-layer Er
₂
O
₃
and TiO
₂
films. We designed multilayer thin films of [Er
₂
O
₃
/TiO
₂
]
⁶
/[Er
₂
O
₃
]
²
/[TiO
₂
/Er
₂
O
₃
]
⁶
such that they can act as photonic crystals exhibiting a resonance wavelength of 514 nm. We prepared single-layer TiO
₂
and Er
₂
O
₃
thin films on quartz glass substrates by employing a magnetron sputtering deposition method. Uniform films exhibiting very high transmittance values were obtained. Deposition rates of the TiO
₂
and Er
₂
O
₃
films were 0.44 and 0.82 nm/s, respectively. [Er
₂
O
₃
/TiO
₂
]
⁶
/[Er
₂
O
₃
]
²
/[TiO
₂
/Er
₂
O
₃
]
⁶
multilayer films, to be used for optical bandpass filter applications, were also prepared using a multitarget sputtering deposition method. Uniform and transparent films were obtained; however, the wavelength corresponding to the highest transmittance was observed around 490 nm through ultraviolet-visible near-infrared spectroscopic measurements. The shift in the wavelength can be attributed to the low crystallinity and variations in the thicknesses of Er
₂
O
₃
and TiO
₂
films.