Wearable AMC Backed Near-Endfire Antenna for On-Body Communications on Latex Substrate

A near-endfire, artificial magnetic conductor (AMC) backed wearable antenna is proposed in this paper for wireless body area networks operating in the 2.4-GHz industrial, scientific and medical (ISM) radio band. The latex substrate permittivity has accurately been characterized for realizing a flexible planar Yagi-Uda antenna printed on it using a large-area screenprinting process. The bidirectional-endfire radiation of Yagi- Uda antenna is changed to an off-axis near-endfire radiation using an AMC reflector also printed on latex. The antenna is separated from the upper AMC surface using flexible Styrofoam of thickness 0.044λ
₀
at 2.4 GHz for the best compromise between keeping the antenna structure low profile and achieving an off-axis beam-tilt radiation of ~74° toward the endfire direction. The 0° reflection phase single-layered AMC and double-layered AMC (D-AMC) surfaces are proposed to reduce the body-absorbed radiation and, consequently, minimize the peak specific absorption rate (SAR) level for 2.4-GHz frequency band. Antenna performance in terms of return loss, radiation efficiency, extent of frequency detuning, gain, and SAR level is studied for free space as well as the CST MWS tissue-equivalent voxel model for all the proposed antenna designs. Antenna deformation bending study when placed on the human body is also performed in this paper. The antenna design is first optimized and fabricated on printed circuit board to verify the concept and then designed over the latex for actual human on-body all-flexible configuration. The Yagi-Uda antenna backed with D-AMC reflector demonstrates the measured return loss bandwidth of 45 MHz (2.425-2.47 GHz) and the gain of 0.12 dBi in the endfire direction with an improved on-body (chest) radiation efficiency of 78.97% and a reduced peak SAR level of 0.714 W/kg (average over 10-g tissue) for the compact overall flexible latex antenna volume of 0.4λ
₀
×0.4λ
₀
×0.076λ
₀
at 2.4 GHz. To the best of our knowledge, this is the first latex-based endfire antenna for on-body 2.4-GHz wireless communications backed with an AMC periodic metamaterial surface.