Particle Sensor Using Solidly Mounted Resonators

This paper describes the development of a novel particle sensing system employing zinc oxide based solidly mounted resonator (SMR) devices for the detection of airborne fine particles (i.e., PM2.5 and PM10). The system operates in a dual configuration in which two SMR devices are driven by Colpitts-type oscillators in a differential mode. Particles are detected by the frequency shift caused by the mass of particles present on one resonator with while the other acts as a reference channel. Experimental validation of the system was performed inside an environmental chamber using a dust generator with the particles of known size and concentration. A sensor sensitivity of 4.6 Hz per μg/m
³
was demonstrated for the SMRs resonating at a frequency of 970 MHz. Our results demonstrate that the SMR-based system has the potential to be implemented in CMOS technology as a low-cost, miniature smart particle detector for the real-time monitoring of airborne particles.