A wideband unity-gain buffer in 0.13-μm CMOS

In this paper, an ultra wideband analog voltage-mode buffer is presented which can drive a load impedance of 50 Ω. The presented feedback-based buffer uses a compound amplifier which is a parallel combination of a high-DC gain operational amplifier and a operation transconductance amplifier to achieve a high unity gain bandwidth. A proof-of-concept prototype is designed and fabricated in a 0.13 μm CMOS process. The simulation and measurement results of the proposed buffer are in good agreement. The prototype buffer circuit consumes 7.34 mW from a 1.3-V supply, while buffering a 2 GHz sinusoidal input signal with a 0.4 V peak-to-peak (V
_pp
) amplitude and driving an AC-coupled 50-Ω load.