A transistor performance figure-of-merit including the effect of gate resistance and its application to scaling to sub-0.25-/spl mu/m CMOS logic technologies

This paper presents an improved figure-of-merit (FOM) for CMOS performance which includes the effect of gate resistance. Performance degradation due to resistive polysilicon gates is modeled as an additional delay proportional to the RC product of a polysilicon line. The new FOM is verified from delay measurements on inverter chains fabricated using a 0.25-/spl mu/m CMOS process. A furnace TiSi/sub 2/ process is used to underscore the effect of increased sheet resistance of narrow polysilicon lines. Excellent correlation between measured and predicted inverter chain delays is obtained over a variety of design, process and bias conditions. An expression for the gate sheet resistance requirement is derived from the new FOM. Using this expression, requirements on the gate sheet resistance are calculated corresponding to a technology roadmap for performance and oxide thickness.