Systematic Design of Large-Scale Multiport Decoupling Networks

In radio-frequency systems that drive coupled dissipative loads, the matching network between the amplifiers and their loads needs to account for the coupling. With N amplifiers driving N loads, a favorite choice is a “decoupling” network, which is a lossless reciprocal network that has N input ports connected to the sources and N output ports connected to the loads. The decoupling network transforms the coupled impedance of the loads into the uncoupled characteristic impedance of the sources. Any incident signal at the input ports of the network is transferred, without reflection, to the loads. Decoupling networks can be realized by generalized Π-networks of lumped and distributed impedances, depending on the design frequency. Although the impedance requirements of the network are unique, its realization is not, and networks that involve many impedances can be difficult to lay out on circuit boards. In this paper, we establish that a decoupling network requires a minimum of N
²
+N impedances for N arbitrarily coupled loads, and provide a systematic method for realizing this lower bound. We also provide methods for selectively eliminating impedances. We give an example where only 4N impedances are needed for loads that have coupling symmetry. Applications of the methods are presented.