A PFC based BLDC motor drive using a Bridgeless Zeta converter

This paper deals with a PFC (Power Factor Corrected) Bridgeless Zeta converter based VSI (Voltage Source Inverter) fed BLDC (Brushless DC) motor drive. The speed control is achieved by controlling the voltage at the DC bus of VSI using a single voltage sensor. This facilitates the operation of VSI in fundamental frequency switching mode (Electronic Commutation of BLDC motor) in place of high frequency PWM (Pulse Width Modulation) switching for speed control. This leads to low switching losses in VSI and thus improves the efficiency of the drive. Moreover, a bridgeless configuration is used to reduce the conduction losses of DBR (Diode Bridge Rectifier). The bridgeless Zeta converter working in DCM (Discontinuous Conduction Mode) is used which utilizes a voltage follower approach thus requiring a single voltage sensor for speed control and PFC operation. The proposed drive is designed to operate over a wide range of speed control and under wide variation in supply voltages with high power factor and low harmonic distortion in the supply current at AC mains. An improved power quality is achieved with performance indices satisfying the international PQ (Power Quality) standards such as IEC-61000-3-2.