Unipolar charging of cylindrical insulating particles near electrode surfaces

Numerous papers have discussed the ionic charging of insulating spheres in uniform electric fields. However, in certain electrostatic technologies, such as separation and flocking, the particles are often cylindrical in shape, and they get charged on the surface of an electrode or in its proximity, so that existing formulas cannot be used. This paper addresses this problem from both a computational and an experimental point of view. The charge acquired by cylindrical particles of various dielectric constants was evaluated with an original computer program, based on the boundary-element method of field analysis. The computed results show that the position of the particle with respect to the electrodes changes the value of the saturation charge. The experimental setup simulated the charging conditions in a roll-type electrostatic separator. The unipolar space charge was generated by a needle-type electrode. An electrometer was used to measure the charge acquired by millimeter-size calibrated cylinders of polyethylene and polyvinyl chloride on a rotating roll electrode. The experimental results, which were in good agreement with the theoretical predictions, put forward a particle self-discharge effect, at field intensities beyond a well-defined threshold. This kind of information may guide the design of the electrostatic technologies based on the corona charging of granular matter.