100 kHz MEMS Vibratory Gyroscope

The behavior of MEMS rate gyroscopes depends on the sensor's resonance frequency f
₀
. Key features like robustness against external vibrations and ease of integration can be optimized by increasing f
₀
. We designed and fabricated a device with f
₀
=100 kHz for experimental and theoretical investigation of MEMS vibratory gyroscopes with increased f
₀
. The frequency of 100 kHz is significantly above the typical f
₀
of current gyroscopes which is in the range of 10 kHz to 30 kHz. Measurements prove that key parameters that are theoretically derived from a 15 kHz reference model can be scaled to 100 kHz with good accuracy. It is shown that the increase of f
₀
to 100 kHz has-on the one hand-design trade offs like a much lower sensitivity and higher quadrature and-on the other hand-major advantages like the significantly improved vibration robustness.