Influence of the anode material on an argon arc

The interaction between the arc and the anode was experimentally studied by means of a transferred arc burning in argon with copper, iron, or steel anodes. Depending on the rate of anode cooling, a stable plasma was obtained just above the anode, established either in pure argon (strong cooling) or in a mixture of argon with metal vapor. Temperature and metal concentration fields were deduced from spectroscopic measurements. Two important results were reached: the arc radius near the anode depends on the nature of the electrode, even without anode erosion; and the presence of metal vapor leads to a cooling of the plasma. The same arc configurations were theoretically simulated by a two-dimensional model. The comparison between experimental and numerical results allows a large proportion of the observed phenomena to be interpreted, in spite of partial discrepancies between predicted and measured values. The dimension of the arc root at the anode depends on the thermal conductivity of the solid metal, whereas the cooling effect due to metal vapor in the plasma is explained by the increases of electrical conductivity and of radiative losses in the presence of the vapor.