Performance evaluation of a 32-nm CNT-OPAMP in analog circuits: Design and comparison of Elliptical filters

In this paper, we have presented the design and characteristic performance evaluation of an Elliptical filter for 800 Hertz bandwidth. First we designed the filter by using Silicon-based CMOS Operational Amplifiers (Si-OPAMPs). Then we designed the filter with Carbon Nanotube-based Operational Amplifiers (CNT-OPAMPs) using a benchmark nine-transistor Operational Amplifier (OPAMP) model with singlewalled Carbon Nanotube Field-Effect Transistors (SW-CNTFETs) as primary building-blocks for 32nm technology. We compared the performance between the two and achieved higher phase margin, improved power dissipation, and significantly low output resistance for the CNT-OPAMP based filter. Then we further evaluated the performance of the CNT-OPAMP based filter by changing the number of SWNTs used for making each of the CNTFET, keeping all other design parameters the same. Our simulation-based assessment has shown a satisfactory superiority for CNT-OPAMP filter design in comparison with Si-based CMOS filter design. The results obtained suggest that the CNT-OPAMP has a promising potential for low-power, highspeed applications in both analog and mixed-signal nanoelectronic circuits.