Inkjet-Printed Two-Dimensional Phased-Array Antenna on a Flexible Substrate

In this letter, we present a two-dimensional 2-bit 4 × 4 phased-array antenna on a flexible Kapton substrate fabricated using inkjet printing. Printed carbon nanotube thin-film transistors (CNT-TFTs) form the switching elements in the phase-shifting network. A multilayer interconnection scheme has been utilized to fully package the subsystem and enable convenient access of the control lines to the 64 CNT-TFTs. By appropriately controlling the on and off states of the TFT switches using a computer mainframe, beam steering of a 5-GHz RF signal at four steering angles of θ = 0
^°
, φ = 0
^°
; θ = 14.5
^°
, φ = 0
^°
; θ = 20.7
^°
, φ = -45
^°
; and θ = 34
^°
, φ = -26.5
^°
are experimentally demonstrated. The insertion loss and the power consumption by the switch array are measured to be 8.17 dB and 11.2 mW, respectively .