Experimental Study of Superconducting Electronic Multichip Modules Packaged Using Carbon Nanotube (CNT) Based Polymer Underfill

We report on the experimental study of flip chip bonded niobium-based superconducting multichip module (MCM) using a nano-engineered cryogenic adhesive (nECA) for a cryogenic underfill that uses single-wall carbon nanotubes. Two MCMs, each having a 5 × 5 mm
²
chip flip chip bonded onto a 1 × 1 cm
²
carrier chip, were made with the nECA and pure cryogenic underfill for comparative analysis. The MCMs (1 × 2) were then mounted on a cryocooler and the thermal performances of the two modules were compared. The MCM bonded using nECA demonstrated a 58% decrease in temperature gradient between chip and carrier with respect to the pure cryogenic underfill. Additionally, we report the
I
-
V
characteristic of 20 unshunted Josephson junctions on the chip and the carrier as a function of carrier temperature and applied power for the MCM bonded using nECA. The MCM was thermal cycled between room temperature and 4.2 K, and the
I
-
V
measurements were repeated at 4.2 K. The experimental study demonstrated that single-wall carbon nanotubes integrated underfill enhanced the thermal performance without affecting the electrical performance. This finding presents a novel nano-engineered packaging material and approach for increased functional modularity for superconducting MCMs.