Scan-to-Scan Correlation of Weather Radar Signals to Identify Ground Clutter

The scan-to-scan correlation method to discriminate weather signals from ground clutter, described in this letter, takes advantage of the fact that the correlation time of radar echoes from hydrometeors is typically much shorter than that from ground objects. In this letter, the scan-to-scan correlation method is applied to data from the WSR-88D, and its results are compared with those produced by the WSR-88D's ground clutter detector. A subjective comparison with an operational clutter detection algorithm used on the network of weather radars shows that the scan-to-scan correlation method produces a similar clutter field but presents clutter locations with higher spatial resolution.