Design and fabrication of QFP logic gates based on YBa/sub 2/Cu/sub 3/O/sub 7/ step-edge junctions

Quantum Flux Parametron (QFP) logic gates were designed and fabricated from a single layer of YBa/sub 2/Cu/sub 3/O/sub 7/ thin film based on step-edge Josephson junctions. Self-inductance (L) of the QFP loop, an important circuit parameter, as is critical current (J/sub c/) of the Josephson junction, was determined by using directly coupled dc superconducting quantum interference devices (SQUIDs). Magnetically coupled dc SQUIDs were used to detect the output signal from the QFP. Simulated waveforms were used to identify the operation modes of the QFP as a function of the circuit parameters. From examination of the output waveforms of the QFP, operation in agreement with simulations was confirmed.