Detection and Classification of Rotor Demagnetization and Eccentricity Faults for PM Synchronous Motors

Condition monitoring of rotor problems such as demagnetization and eccentricity in permanent-magnet synchronous motors (PMSMs) is essential for guaranteeing high motor performance, efficiency, and reliability. However, there are many limitations to the offline and online methods currently used for PMSM rotor quality assessment. In this paper, an inverter-embedded technique for automated detection and classification of PMSM rotor faults is proposed as an alternative. The main concept is to use the inverter to perform a test whenever the motor is stopped and to detect rotor faults independent of operating conditions or load torque oscillations, which is not possible with motor current signature analysis (MCSA). The
$d$
-axis is excited with a direct-current
$+$
alternating-current signal, and the variation in the inductance pattern due to the change in the degree of magnetic saturation caused by demagnetization or eccentricity is observed for fault detection. An experimental study on a 7.5-kW PMSM verifies that demagnetization and eccentricity can be detected and classified independent of the load with high sensitivity.