Superlinear Enhancement of Discharge Driven Electric Oxygen-Iodine Laser by Increasing $g_{0}{L}$

Continuing experiments with electric oxygen-iodine laser (ElectricOIL) technology have significantly increased laser power output by increasing the product of gain and gain-length,
g
₀
L
. The authors report on progress with recent ElectricOIL devices utilizing a new concentric discharge geometry with improved O
₂
(
a
¹
Δ) production at higher discharge operating pressure at higher system flow rates. O
₂
(
a
¹
Δ) produced in flowing radio-frequency discharge in O
₂
-He-NO gas mixture is used to pump
I
(
²
P
_1/2
) by near-resonant energy transfer, and laser power is extracted on the
I
(
²
P
_1/2
)→
I
(
²
P
_3/2
) transition at 1315 nm. Advancements in heat exchanger design reduce O
₂
(
a
¹
Δ) wall loss without sacrificing significant cooling efficiency improving best gain performance from 0.26 to 0.30% cm
^-1
. Modeling of recent data is presented. By increasing the gain length (system size) by a factor of 3, a 5-fold increase in laser output on the 1315-nm transition of atomic iodine was achieved. Flow conditions with
g
₀
L
= 0.042 were used to extract a continuous wave average total laser power of 481 W. A low frequency ±11.9% oscillation in the total power was observed giving a peak outcoupled power of 538 W.