A new cavity configuration for cesium beam primary frequency standards

In the design of cesium beam frequency standards, the presence of distributed cavity phase shifts (associated with residual running waves) in the microwave cavity, due to the small losses in the cavity walls, can become a significant source of error. To minimize such errors in future standards, it has been proposed that the long Ramsey excitation structure be terminated with ring-shaped cavities in place of the conventional shorted waveguide. The ring cavity will minimize distributed cavity phase variations at the position of the atomic beam, provides only that the two sides of the ring and the T-junction feeding the ring are symmetric. A model is developed to investigate the validity of this concept in the presence of the small asymmetries that inevitably accompany the fabrication of such a cavity. The model, partially verified by laboratory tests, predicts that normal tolerances will allow the frequency shifts due to distributed cavity phase variations to be held at the 10/sup -15/ level for a beam tube with a Q of 10/sup 8/.<
>