A Fully Integrated 16-Element Phased-Array Transmitter in SiGe BiCMOS for 60-GHz Communications

A phased-array transmitter (TX) for multi-Gb/s non-line-of-sight links in the four frequency channels of the IEEE 802.15.3c standard (58.32 to 64.8 GHz) is fully integrated in a 0.12-μm SiGe BiCMOS process. It consists of an up-conversion core followed by a 1:16 power distribution tree, 16 phase-shifting front-ends, and a digital control unit. The TX core is a two-step sliding-IF up-conversion chain with frequency synthesizer that features 40 dB of gain programmability, I/Q balance and LO leakage correction, and a modulator for 802.15.3c common-mode signaling. The tradeoffs involved in the implementation of a 1:16 power distribution network are analyzed and a hybrid passive/active distribution tree architecture is introduced. Each of the 16 front-ends consists of a balanced passive phase shifter and a variable-gain, 3-stage PA that features oP
_1dB
programmability through the bias control of the its final stage. All of the chip features are digitally controllable and individual memory arrays are integrated at each front-end to enable fast beam steering through a high-speed parallel interface. The IC occupies 44 mm and is fully characterized on wafer. The TX delivers 9 to 13.5 dBm oPidB per element at 60.48 GHz with a total power consumption of 3.8 to 6.2 W. Each element attains a phase-shift range >360° with an amplitude variation <;±1 dB across phase settings and adjacent elements. Measurement results from a packaged IC in an antenna chamber are also presented including the demonstration of spatial power combining up to +40 dBm EIRP and 16-element radiation patterns.