Onboard correction of mispointing errors in satellite altimeter returns (oceanographic measurement)

An investigation to determine whether useful onboard mispointing corrections to satellite altimeter measurements for errors in antenna mispointing can be made with the European Research Satellite (ERS-1) altimeter is reported. An analytic model of the nonlinear mispointing control loop is developed and the step response and signal-to-noise ratio (SNR) behavior of the loop in isolation are derived. The ERS-1 altimeter is expected to have a maximum static mispointing error of 0.2 degrees and a maximum harmonic error of 0.1 degrees . Taking these values as typical, it is concluded that with a loop time response of about one minute, it is not possible to correct the biased estimate of backscattering coefficient without decreasing its SNR. However, it is possible to achieve an unbiased estimate with a noise level significantly less than the uncorrected bias, but a successful implementation would require very accurately calibrated range gate samplers.<
>