Modeling of a Streamer Plasma Reactor Energized by a Pulse Compression Modulator

This paper presents a semi-empirical model for a wire-wire corona reactor driven by a capacitive storage solid-state pulse generator. The reactor electrode system is configured as a checker mesh of potential and grounded threaded electrodes, and the pulse generator is based on a modern magnetic pulse compression topology. This presentation considers the effect of the geometrical parameters of the reactor (the total length of the high-voltage electrode surrounded by its grounded counterparts and the gap between the high-voltage and grounded electrodes) on the operation of the atmospheric pressure streamer plasma system. The model analyzes the discharge processes in the reactor by distinguishing between four phases, each being represented by an equivalent circuit: before the streamer generation, during the primary streamer propagation, after the primary streamers have crossed the interelectrode gaps, and after the plasma conductivity quenching. The new reactor model is realized on the PSpice platform, and the simulations are done using an improved pulse modulator model. The simulation results are compared with the experimental data, showing the model validity. Based on the simulated model, a better matching between the wire-to-wire reactor load to the pulse generator may be achieved.