Low cost Doppler ratio detection radar with interclutter visibility

A low cost concept, called Doppler ratio detection (DRD), for suppressing the clutter residue of Doppler radars is described. The concept provides a simple way to establish a target detect-clutter reject threshold at each range cell, whether a MTI canceler only or a bank of Doppler filters is used. In its simplest form, the target detect/clutter reject threshold is based on the ratio of the magnitudes of Doppler-processed and non-Doppler processed signals. The experiment showed that clutter was rejected, but the amount of added degradation in detection sensitivity was not determined. This degradation will depend on a number of factors, including the number of pulses per beamwidth.