Adaptive synchronization control of a robotic manipulator operating in an intelligent workcell

The formulation and implementation of a synchronization control scheme applicable to a robotic workcell is described. Such a workcell typically consists of a conveyor system that transports industrial workpieces, a binary camera to recognize the geometric and other characteristics of the workpiece, and a robotic manipulator that is suitably controlled to direct its end effector to achieve a synchronized rendezvous with the workpiece. Subsequent to a successful rendezvous, the robot may pick up the piece (in pick-an-place operations) or perform such other online operations as assembly, processing, or quality inspection. A methodology to ensure rapid rendezvous with accurate tracking is emphasized. Simulation and implementation results are compared and discussed.<
>