In Situ Cross-Calibration of In-Fiber Bragg Grating and Electrical Resistance Strain Gauges for Structural Monitoring Using an Extensometer

This study addresses the direct calibration of optical fiber strain sensors used for structural monitoring and is carried out
in situ
. The behavior of fiber-Bragg-grating-based sensor systems when attached to metal bars, in a manner representative of their use as reinforcement bars in structures, was examined and their response calibrated. To ensure the validity of the measurements, this was done using an extensometer with a further calibration against the response of electrical resistance strain gauges, often conventionally used, for comparison. The results show a repeatable calibration generating a suitable geometric factor of extension to strain for these sensors, to enable accurate strain data to be obtained when the fiber-optic sensor system is in use in structural monitoring applications.