Electromagnetic interference from discharge phenomena of electric contacts

The electromagnetic interference (EMI) from steady arc and showering arc electrical discharges was investigated. The experiment was carried out on Ag, Pd, and Ag-Pd alloy contacts under several circuit current conditions. Radiated noise levels were measured at frequencies up to 200 MHz. Experimental results show that the EMI levels from a steady arc, which is generally the phenomenon of the break of a noninductive circuit, are dependent on the composition of contact materials. The EMI levels from a showering arc, which is generally the phenomenon of the break of an inductive circuit, are independent of the composition of contact materials. The EMI from a steady arc is roughly inversely proportional to the frequency in the 0.1-10.0-MHz range, whereas in the 25-200-MHz range, the maximum level of EMI appears at about 70 MHz. The frequency characteristics of EMI from a showering arc are similar to those from a steady arc. The EMIs from these arcs exceed, in part, statutory limits.<
>