Logic failure analysis 65/45nm device using RCI & nano scale probe

Scan chain failure analysis is more difficult and complicated compared to memory analysis and analysis of defect monitoring test element group (DTEG) which has a large area is also difficult. This paper has verified that various defects of logic process sub 65nm device are easily analyzed through Resistive Contrast Imaging (RCI) and nanoprobe. In addition, Metal5 (M5) bridge defect (Short case) was detected in failure of scan ATPG (Automatic Test Pattern Generation) which has long failing nets and by discovering Via4 (V4) open defect (Open case) by Unetch, it was confirmed that it is possible to analyze high resistance Via failure. And it was verified that position of Cu line void of metal7 (M7) can be localized at high level metal layer. It is judged that it will be used usefully in failure analysis sub 65nm in the future as a technique utilizing principle of RCI and nanoprobe and also it will make lots of contributions to improvement of yield.